Table of Contents
Advertisement
CGC 200 installation and commissioning
instructions 4189340806 UK
1. Press
to increase the value of the digit where the cursor is blinking. You can use
crease the value.
2. Press
to move to the next digit.
3. When the cursor is on the last digit, press
opens.
3. Press
or
4. Press
to start editing the parameter.
1. Press
to increase the value of the digit where the cursor is blinking. You can use
crease the value.
2. Press
to move to the next digit.
3. When the cursor is on the last digit, press
4. After the change is entered, none of the parameter digits will blink. You can now press
to get to the next parameter you want to change.
5. When you have finished changing parameters, press
The table below lists the functions of the push-buttons in parameter setting mode.
Button
and
DEIF A/S
to get to the parameter you want to change.
Description
OFF and PAGE DOWN together
AUTO
ON
PAGE DOWN
OFF
to enter the access code. The parameter list now
to enter the change.
to exit parameter setting mode.
Enter parameter setting mode
Increase value, or next parameter
Decrease value, or previous parameter
Next, or Enter
Exit
Commissioning
to de-
to de-
or
Function
Page 29 of 32
Advertisement
Table of Contents
