44
Installing the S8700 Multi-Connect
Installing an Avaya MCC1 Media Gateway
Unpack and Inspect Media Gateway
!
CAUTION:
A media gateway may weigh as much as 800 lb. (363 kg) and may be top heavy. Use
extreme caution.
1
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2
3
4
Unpack and Inspect Auxiliary Cabinet
The auxiliary cabinet can be positioned adjacent to the control hardware in the rack or any
media gateway.
1
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2
3
4
NOTE:
You reinstall the lower rear panel when the installation is completed.
Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the
container. If the container has been shaken or tilted beyond specifications, the indicators
are red, indicating potential damage. Report any damage according to local shipping
instructions.
Unpack the media gateway and remove all packing material.
Move the media gateway into its proper position.
Do not adjust the leveling feet at this time.
Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the
container. If the container has been shaken or tilted beyond specifications, the indicators
are red, indicating potential damage. Report any damage according to local shipping
instructions.
Unpack the cabinet and remove all packing material.
Move the cabinet into its proper position.
Remove the lower rear panel from the auxiliary cabinet.
May 2002