Installing the Avaya S8700 Media
Server
for Multi-Connect Configuration
These procedures are for installing a new Avaya S8700 Media Server for Multi-Connect
Configuration. As part of the procedures for configuring the various pieces of hardware, you
use three administration interfaces: media server web interface, Avaya Site Administration
interface, and a command line interface.
The following process is included in this installation procedure:
•
''Pre-installation Setup'' on page 16
•
''Mount the Hardware in the Rack'' on page 19
''Configure the Hardware in the Rack'' on page 20
•
''Customize the Active Media Server'' on page 36
•
''Install the Media Gateways'' on page 41
•
''Cabling Port Networks'' on page 116
•
''Connect the Hardware'' on page 242
•
•
''Completing the Installation Administration'' on page 261
•
''Accessing the Avaya S8700 Media Server'' on page 266
•
''Testing the Complete Configuration'' on page 271
May 2002
Installing the S8700 Multi-Connect
15