Verify Media Server 1 Connection To Customer's Lan - Avaya S8700 Installing Manual

1 Click Install License, select "Install new license," then click the Install License button to
install the license files.
2 Installing the Avaya authentication file removes all default passwords and establishes
new ones. After the installation, services logins specific to the media server are protected
through Access Security Gateway (ASG).
3 Click Install Avaya Authentication > Install to install the Avaya authentication file.
Verify media server 1 connection to customer's
LAN
The following administration is done on the services laptop computer connected to server 1
using the S8700 Media Server Web Interface. You also need a customer representative with
knowledge of the customer's LAN configuration and access to a desktop on the LAN.
1 Connect a customer-supplied CAT5 cable from server 1, port Eth4, to the customer's
LAN. Refer to Getting Started with Avaya S8700 Media Server for Multi-Connect
Configuration.
On the S8700 Media Server Web Interface click on Execute Ping.
2
3 Have the customer enter a name, if DNS is administered, or IP address.
Verify that the ping executes successfully and a response is returned from the target host.
4
May 2002
Installing the S8700 Multi-Connect
Configure the Hardware in the Rack
27