Test Expansion Interface Circuit Packs (S8700 Multi-Connect Only) - Avaya S8700 Installing Manual

286 Installing the S8700 Multi-Connect
Testing the Complete Configuration
Sample IPSI 01A Test Results Screen
test ipserver-interface 1a
Port
01A
01A
01A0201
01A0201
01A0202
01A0202
01A0203
01A0203
01A0204
01A0204
01A0205
01A0205
01A0206
01A0206
01A0207
Test Expansion Interface Circuit Packs
(S8700 Multi-Connect only)
Check each Expansion Interface (EI) circuit pack in the media gateway.
1
NOTE:
Labels on the port network and carrier and on the strip under the circuit pack contain this
information.
2
3
4
Maintenance Name
TONE-BD
TONE-BD
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
press CANCEL to quit --
Type test board UUCSS where UUCSS is the cabinet, carrier, and slot for an Expansion
Interface (EI) circuit pack in the media gateway, and press
Verify the screen displays test results similar to
Interface Board 2A01—S8700
If any result is FAIL, check the connections for the fiber optic link.
Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
—
Page 1, S8700 Multi-Connect
TEST RESULTS
Alt. Name Test No. Result
46 PASS
52 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
press NEXT PAGE to continue
"Sample Test Results for Expansion
Multi-Connect". This example is for board 2a01.
May 2002
Page 1
Error Code
.
Enter