Tare & Preset Tare; Tare; 8-2-2Preset Tare; Auto-Tare - Jadever JCAII Manual

8-2 Tare & Preset Tare

8-2-1 Tare

1. Under the weighing mode, place a container weighing (eg. 0.100kg) on the pan.
2. Press key
pointing at "NET".
3. Put the load on the container. The display shown is the Net weight. Press key
gross weight.
4. To clear tare, with an empty pan, press key

8-2-2Preset Tare

1. Input the tare value using the numeric key together with key
units(g / kg). (scale will beep if the tare value is larger than full capacity.)
2. Press key . The
pointing at "PRESET TARE"
3. Put the load on the container. The display shown is the Net weight. Press key
gross weight.
4. To clear tare, with an empty pan, press key

8-2-3 Auto-tare

Set the high limit of the tare value
1. Press under normal weighing mode.
2. Use numeric key to input the high limit value. Eg. 0.1kg.
3. Press to save and return.
Set the low limit of the tare value
to complete tare action. The
symbol appears with a symbol
(If not, press
symbol appears with symbol
, and
pointing at "NET" and another
appears in the Total Count window.
)
V03
to see the
press
to switch
to see the
JCAII 9