Analog Section; Setting Mode - Jadever JCAII Manual

5. Analog Section

Input sensitivity
Zero adj. Range
A/D conversion rate
Load cell excitation
Number of load cells.
Resolution.

6. Setting mode

1. Under the weighing mode, long press key
mode.
2. Press or
3. Press key
·Deletes accumulation records
·Display year, date, time
·Go back to previous parameter
·Recalls and displays the accumulated data
·Selects/ sets the Hi Value of weight or piece
·change the next content of parameter
·units switch for the pre-tare function
·Selects the Lo value of weight or piece
·Changes to previous content of parameter
·Tare
·Give up any setting and return to normal weighing
·Call up unit weight ID
·Enable / switch on relay output function under HI/LO setting.
·Print
·Disable/ switch off relay output function under HI/LO setting.
to switch between parameters from P-00 to P-07
or to step through all the available setting options.
1~4mV/V
20% FS
10 times per second.
5V DC
up to 4x350 ohm loadcells
1/30,000
for 3 seconds to enter basic parameter setting
V03
JCAII 4