Weighing; Manual Tare & Preset Tare - Jadever 1.5K User Manual

Low Battery Warning
When appears in the upper left corner of the weight window, the battery requires
recharging. The charge lamp turns green from red when the recharging is completed (which
takes about 8 hours).Disconnect the scale from power supply when it is fully charged.

Weighing

Begin with no load on the scale, the display reading zero. Place item(s) to be weighed on the
scale. The display shown is 1000.0g, gross weight. （ The desired weighing unit should be
selected before weighing, refer to section 5-5. ）
→
Manual Tare & Preset Tare
When weighing a sample that must be held in a container, tare stores the container weight
into memory.
Manual Tare
1) Under the weighing mode, place the container on the weighing pan, wait till stable
symbol appears, and press the key
→
2) Place the item(s) to be weighed into the container. The weight displayed is the net weight.
3) Remove all items from the weighing pan; the screen displays the tare value.
4) To clear tare with an empty pan, Press down key
Preset Tare
TARE
1) Long press key
left-most digit
UNIT/LO
2) Press key
increase setting values and key
Tare value as
TARE
. The container is tared.
for 3 seconds. The scale is now in Digital inputting mode with the
to shift leftwards, key
M-
to decrease setting value. E.g. here we set the Preset
TARE ZERO/ESC
or key
PRINT/HI
to shift rightwards,
Vetek Weighing AB
.
M+
key to