Option - Jadever JCAII Manual

Under the parameter P-05, select "normal" printer.
Check the baud rate (P-06) and the data (P-07) is compatible to printer. If not, please change
the setting accordingly.
Under the normal weighing mode, press
that this printer can replace the SH-24 printer.

9. Option

Scale to Printer
Scale to BP545D(TDP) printer
Universal 9 pin (male) to 9 pin (male) RS-232
connecting cable.
Scale to ZEBRA printer
Universal 9 pin (male) to 9 pin (male) RS-232
connecting cable.
Scale to PC
1. Connect the scale and computer by using the RS232 cable as the following picture.
2. Please set the print mode
= Manual
= Print after
= Print when quantity is ok(with check function)
= Print when weight is ok(with check function)
appears
to print. If the printer is able to print, it means
Scale to SH-24（TP）printer
Universal 9 pin (male) to 25 pin (male) RS-232
connecting cable.
Scale to EZ printer
Universal 9 pin (male) to 9 pin (male) RS-232
connecting cable.
V03
JCAII 23