8-7Quantity Check; Set The High Limit Of Quantity; Set The Low Limit Of Quantity; Enable / Disable The Quantity Check Function - Jadever JCAII Manual

8-7Quantity check

8-7-1 Set the high limit of quantity

1. Press under normal weighing mode. The last high limit value of quantity is blinking in the
Total Count window while the arrow is pointing at HI. (If the value in Total Count window is not
blinking , press
Eg. 111pieces.
2. Use numeric key to input the high limit of quantity you want.
3. Press to save and return.

8-7-2 Set the low limit of quantity

1. Press under normal weighing mode. The last low limit value of quantity is blinking in the
Total Count window while the arrow is pointing at LO. (If the value in Total Count window is not
blinking, press
Eg. 111pieces.
2. Use numeric key to input the low limit of quantity you want.
3. Press to save and return.

8-7-3 Enable / Disable the quantity check function

1. Under normal weighing mode, press
blinking. (If the value in Total Count window is not blinking press
2. If you want to enable the function, press
If you want to disable the function, press
Note: When the HI & LO checking function is enabled, there will be an arrow pointing between
PERSET TARE and NET.

8-8 Weight check

8-8-1Set the high limit of weight

1. Press under normal weighing mode. The display of the weight is blinking in the Weight
)
)
or . The display in the Total Count window is
)
JCAII 18
V03