Tare; Weight Checking - Jadever JWE User Manual

5-2 Tare

When weighing a sample that must be held in a container, tare stores the container weight
into memory.
Tare
1) Under the weighing mode, place the container on the weighing pan, wait till stable indicator
appears, and press the key
→
2) Place the item(s) to be weighed into the container. The weight displayed is the net
weight.
3) Remove all items from the weighing pan; the screen displays the tare value.
4) To clear tare with an empty pan, Press down the key
ZERO+.
"ZERO") or key

5-3 Weight Checking

1) Under the weighing mode, press key
2) Begin by pressing the key
left-most digit blinking.
3) To change the upper limit, Press key
TARE
to shift to the next digit.
4) Advance to the lower limit setting by pressing key
blinking.
5) When the lower limit has been set, press key
weight checking.
M+/MR
6) Press key
TARE
. The container is tared.
.
MC/SET
MODE
. The value of upper limit will display first, with the
ZERO+
.Repeat the procedure above to set the lower limit.
to cancel Weight Checking and return to weighing mode.
TARE
to enable the weight checking function.
to increment the flashing digit and the key
MODE
MODE
to store the settings and begin
JWE
(after the appearance of
with the left-most digit
5