Operation; Weighing; Tare & Preset Tare; Operation 7-1 Weighing - Jadever JCN User Manual

Note: If you need to change the value, do as the following: Press key
the value setting. Press key
M-/HI
key or
M+/SAVE
to save.
4. Put the corresponding weight on the weighing pan,
TARE/
and then press
Note: After the first point calibration, the window can display the weight value. If no need
for the other point calibration, move to Step 6 to finish the calibration procedure.
5. Add another weight 500g to the current weight. The window
will show the total weights value. Press
Repeat this step to complete the calibrations of on3, on4 and on5.
ZERO/ESC
6. Press
It will return to normal weighing mode.
Note: the window displays
return to the normal weighing.

7. Operation

7-1 Weighing

Put item to be weighed on the scale. The Weight window
7-2 Tare & Preset Tare
Tare
When weighing a sample that must be held in a container,
into memory.
1) Under the weighing mode,
TARE
Press the key
The symbol appears and the window displays as shown on the right
2） Put the item into the container.
Then the window displays the net weight.

/MR
or
PRINT/LO
to modify the value (or via numeric keys). Press key
to complete the first point calibration.
to save. After the window displays ―
automatically when on5 is finished. It will be saved and
put the container on the scale.
to complete tare action.

TARE/
to move leftwards or rightwards. Press
TARE/
to complete.
shows
tare and store
G N/SET
‖,
1.00kg (Gross Weight).
the container weight
to enter
9