Accumulation; Choose Accumulation Mode; Set The Max Account Of Accumulation; Manual Accumulation - Jadever JCAII Manual

8-4 Accumulation

8-4-1 Choose Accumulation Mode

1. Press with no load on the pan.
2. Press or
=Manual
= Auto-accumulate when
= Auto-accumulate when quantity is between HI – LO limits
= Auto-accumulate when weight is between HI – LO limits
3. Press to save and return.

8-4-2 Set the Max Account of accumulation

The max accumulation number is 99. You can change the max accumulation number as following:
For example, if you want to change the accumulation number to 9
1. Press and the Unit Weight display is blinking.
2. Press to save and return. And now you can accumulate up to 9 times only.
Note: You can change the max accumulation back to 99 times by repeating the above steps.
It will beep for 3 seconds when accumulate to the max account (eg. Max accumulation=9) and the
is blinking
Under this condition, you have the following options:
Press , it will print every set and total,
SH-24. Label printer could not do it.)
Press to return to normal weighing mode, and still keep accumulation.(But if you try to
accumulate another set, it will appear
Press twice to delete all accumulation,

8-4-3 Manual Accumulation

1. Put the article on the pan. Press key
to choose the accumulation mode
symbol appears
is still blinking. (It is only for normal printer
to warm)
. The symbol " " is blinking in the Unit
JCAII 12
V03