Product Introduction; Display - Jadever JCAII Manual

4. Product Introduction

4-1 Display

1) Weight Window: displays weight of object on weighing pan, or accumulated weight value.
2) Unit Weight Window: displays the average piece weight value, or number of weighments .
3) Total Count Window: displays the calculated number of pieces on the weighing pan, or
accumulated piece count value.
4) Tare or Preset Tare indication.
5) Center of Zero Indication, The zeroing range is ±2﹪of weighing capacity.
6） Symbol
7） Under the sample counting mode,
weight is lower than 4/5 of scale division or the quantity of sample is less than 10 pieces.
8） "Accumulation" function is enabled under weighing mode.
9） Under entering a known unit weight mode, Symbol " " points at "UW" when entered unit
weight is lower than 4/5 of scale division. Unit weight is too small for ensuring accurate quantity
calculations.
10）Low Battery Indicator: When "
11）CHANGE Charge Lamp
Red--- battery is charging
Green---battery is fully charged
Symbol " " points at
ACAI
functioning.
" " points at "
PRESET TARE
"ACAI" when Automatic counting accuracy improvement is
" when
Tare value entered via numeric keys.
Symbol " " points at
" appears, the battery power requires recharging.
"SMPL" when calculated unit
V03
JCAII 2