8-8-2Set The Low Limit Of Weight; 8-8-3Enable / Disable The Weight Check Function; Unit Weight Id; 8-9-1Saving Id Method 1 - Jadever JCAII Manual

window while the arrow is pointing at HI in the Total Count window. (If the value in Weight
window is not blinking, press
Eg. 2kg.
2. Use numeric key to input the high limit of weight you want.
3. Press to save and return.

8-8-2Set the low limit of weight

1. Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at LO in the Total Count window. (If the value in Weight
window is not blinking, press
E.g. 2kg.
2. Use numeric key to input the low limit of weight you want.
3. Press to save and return.

8-8-3Enable / Disable the weight check function

1. Under normal weighing mode, press
blinking. (If the value in Weight window is not blinking, press
2. If you want to enable the function, press
If you want to disable the function, press
Note: When the HI & LO checking function is enabled, there will be an arrow pointing between
PERSET TARE and NET.

8-9 Unit weight ID

Note: possible save up to 50 ID

8-9-1Saving ID method 1

For example, save 1.23g to ID 12
1. Press
)
)
or
under normal weighing mode and the Unit Weight is blinking.
. The display in the Weight window is
)
V03
JCAII 19