Introduction; Precautions; Before Using The Product; Unpacking And Checking - Jadever JCAII Manual

1. Introduction

Thank you for deciding to purchase a JCAII counting scale. This goods has the excellent
performance and splendid properties under severe quality management .It is recommended to
read this manual in full before using it for good function application.

2. Precautions

Place the scale on a flat and stable surface.
◎
Verify that the input voltage and the plug type matches the local AC power supply.
◎
War m up the scale for 15 minutes before using it the first time.
◎
Keep the sca le away from EMI noise, strong wind and vibration, which might cause incorrect
◎
reading.
◎ Avoid sudden temperature changes (suitable operating temperature is between -5℃~ 40℃.)
Disconnect the power supply when cleaning the scale.
◎
◎ Do not immerse the scale in water or other liquids.
Service should be performed by authorized personnel only.
◎

3. Before Using the Product

3-1 Unpacking and Checking

Open the package and check the instrument for transport damage. Immediately inform your
dealer if you have complaints or if parts are missing. The package should contain:
● Scale body
● Stainless steel pan

3-2 Installing Components

Cover the stainless steel pan on the top housing properly before using the scale.
Please find the delivery protection screw in the bottom of the scale. Loose it according to
the instruction sticker next to it
Before use the scale
Before move the scale

3-3 Leveling the Scale

To compensate for small irregularities or inclinations at the location, the scale can be leveled. The
scale is equipped with a level indicator at the front panel .Adjust the adjusting feet until the air
bubble in the indicator is centered as shown.
Note: The scale should be leveled each time its location is changed.
● User manual
● Wire (power cord)
Important:
Loose the screw counter-clockwise to the end
Tighten the screw clockwise to the end
See 3-3 Leveling the Scale for details.
V03
JCAII 1