Eaton CGLine+ Touchscreen Controller Manual page 26

Luminaire configuration in the strand
Swap luminaires of different zones
Select the luminaire address to be swapped in the right window (1).
Select the new zone with the luminaire to be swapped in the left window (2).
GB
Select the luminaire with the target address to be swapped in the left window (3).
Tap on the <Swap> button (4).
2
1
3
4
In the example the luminaire in zone 1, address 2 was swapped with luminaire in
zone 3, address 1.
26 Manual CGLine+ Touchscreen Controller ZNO2038000 A www.eaton.com