Start up the Cleaning Device
Requirements for
The following requirements must be met in order to start up the cleaning device:
Start-up Opera-
-
tion
-
-
-
-
-
-
-
-
-
Start-up Opera-
An active signal from the robot control starts up the cleaning device.
tion
Cleaning device work stand screwed tightly to the surface
Cleaning device screwed tightly to the work stand
Gas nozzle clamping device set - not when using a gas nozzle with an outside diam-
eter of 25 mm (0.98 inches). For more info, see the "Adjusting the Gas Nozzle Clamp-
ing Device" chapter
Cleaning cutter fitted
Position of the cleaning motor set
Parting agent atomizer started up
Compressed air supply set up
Functions manually checked
Cleaning device connected to the robot control
All covers installed and all safety devices in good order and installed in the location
intended
49