Emf Measures; Safety Measures At The Setup Location And During Transport; Safety Measures In Normal Operation - Fronius Robacta Reamer X-Line J Operating Instructions Manual

EMF measures

Electromagnetic fields may cause health problems that are not yet known:
-
-
-
-
Safety Measures A toppling device can be deadly! Install the device horizontally on a flat, stable surface free
at the Setup Loca- of vibration, anchor it securely on the surface, and secure against toppling.
tion and during
Special regulations apply in areas at risk of fire or explosion
Transport
-
Use instructions and checks within the company to ensure that the vicinity of the workplace
is always clean and organized.
Take care to ensure that the applicable national and regional guidelines and accident pre-
vention regulations are observed when transporting the device, especially guidelines con-
cerning hazards during transport and shipment.
It is essential to conduct a visual inspection of the device to check for damage after it has
been transported but before it is commissioned. Have any damage repaired by trained ser-
vice technicians before commissioning the device.
Safety Measures Only operate the device when all safety devices are fully functional. If the safety devices
in Normal Opera- are not fully functional, there is a risk of
tion -
-
-
Safety devices that are not fully functional must be repaired before the device is started up.
Never bypass or disable safety devices.
Before starting up the device, ensure that no one can be put in danger.
The device must be examined at least once a week for externally detectable damage and
functionality of the safety devices.
-
-
-
-
-
10
Effects on the health of persons close by, e.g., those with pacemakers and hearing
aids
Persons with pacemakers must seek advice from their doctor before staying in the im-
mediate vicinity of the device and the welding process
Keep distances between welding cables and the head/torso of the welder as large as
possible for safety reasons
Do not carry welding cables and hosepacks over one's shoulder or wrap them around
one's body or body parts
Follow the appropriate national and international regulations.
injury or death to the operator or a third party,
damage to the device and other material assets belonging to the operating company,
inefficient operation of the device.
Only use appropriate original parting agents from the manufacturer.
When handling parting agent, observe the information on the parting agent safety data
sheet. The parting agent safety data sheet can be obtained from your service center
or via the manufacturer's website.
Do not mix parting agents from the manufacturer with other parting agents.
If damage occurs due to the use of other parting agents, the manufacture is not liable
for this and all warranty claims are forfeited.
Properly dispose of used parting agent according to national and international regula-
tions.