Table of Contents
Advertisement
Maintenance and
It is impossible to guarantee that bought-in parts are designed and manufactured to meet
repair
the demands made of them, or that they satisfy safety requirements.
-
-
-
-
The housing screws provide the ground conductor connection for earthing the housing
parts.
Only use original housing screws in the correct number and tightened to the specified
torque.
Safety Inspection
The manufacturer recommends that a safety inspection of the device be performed at least
every 12 months.
A safety inspection by a certified electrician is recommended:
-
-
-
-
For the safety inspection, follow the appropriate national and international standards and
guidelines.
You can obtain more information about the safety inspection and calibration from your ser-
vice center. The service center will provide the necessary documents upon request.
Disposal
Do not dispose of this device with normal domestic waste! To comply with the European
Directive on Waste Electrical and Electronic Equipment and its implementation as national
law, electrical equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility. Any device that you no longer require must
be returned to your dealer, or you must locate the approved collection and recycling facil-
ities in your area. Ignoring this European Directive may have potentially adverse affects on
the environment and your health!
Safety Symbols
Devices with CE marking satisfy the essential requirements of the relevant directives (e.g.
the low-voltage, electromagnetic compatibility, and machinery directives).
Devices marked with the CSA test mark satisfy the requirements of the relevant standards
for Canada and the USA.
Copyright
Copyright of these operating instructions remains with the manufacturer.
Text and illustrations are technically correct at the time of going to print. The right to make
modifications is reserved. The contents of the operating instructions shall not provide the
basis for any claims whatsoever on the part of the purchaser. If you have any suggestions
for improvement, or can point out any mistakes that you have found in the operating in-
structions, we will be most grateful for your comments.
Use only original spare and wearing parts (also applies to standard parts).
Do not carry out any modifications, alterations, etc. to the device without the manufac-
turer's consent.
Components that are not in perfect condition must be replaced immediately.
When ordering, please give the exact designation and part number as shown in the
spare parts list, as well as the serial number of your device.
after changes
after alterations
after repair, care, and maintenance
at least every 12 months.
11
Advertisement
Table of Contents
Troubleshooting
