Table of Contents
Advertisement
Relative humidity:
-
-
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6500 ft.)
Obligations of the
The operating company must only allow persons to work with the device if they
Operating Com-
-
pany
-
-
The safety-conscious work of the personnel must be checked regularly.
Obligations of
All persons who are assigned to work with the device must do the following before begin-
Personnel
ning the work:
-
-
Before leaving the workplace, ensure that no personal injury or property damage can occur
in one's absence.
Particular Hazard
Do not linger in the operating area of the robot.
Areas
Always integrate the device into a higher-level safety system in a secured area.
If this area has to be accessed for preparatory or maintenance work, ensure that
-
-
If untrained operating personnel have access to the device, the compressed air supply to
the device must be disconnected for the duration of this access in accordance with "Per-
formance Level d" of ISO 13849-1.
In addition to these Operating Instructions, the safety rules of the robot manufacturer must
be followed.
The human body, and, in particular, hands, face and hair, plus items of clothing and all
tools, must be kept away from moving components, such as:
-
-
-
-
Do not touch the cleaning cutter immediately after operation - burning hazard. Follow the
special safety regulations for handling the cleaning cutter in the Operating Instructions.
Protect hands, face and eyes from flying parts (chips, etc.) and compressed air/parting
agent mixture discharged from the parting-agent injection nozzle.
Covers must only be opened/removed during maintenance, installation and repair work.
8
Up to 50% at 40°C (104°F)
Up to 90% at 20°C (68°F)
Are familiar with the basic occupational safety and accident prevention regulations
and are trained in handling the device
Have read and understood these Operating Instructions, especially the section "Safe-
ty Rules," and have confirmed this with their signature
Are trained according to the requirements for the work results
Follow the basic regulations for occupational safety and accident prevention
Read these Operating Instructions, especially the section "Safety Rules," and confirm
that they have understood and will follow them by signing
the entire system is shut down for the duration of access to this area
and remains shut down to prevent unintended operation, e.g., as a result of a control
error.
the rotating cleaning cutter
the cleaning motor that moves up and down
the gas nozzle clamping device that moves in and out
Wire cutter
Advertisement
Table of Contents
Troubleshooting
