Problem Solving - Epson EB-L1075U User Manual

Problem Solving

If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems Relating to Images
• No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
• Moving images are not displayed
Videos played back on a computer are black or no image is
projected, or the video is not played back on the computer.
• Projection stops automatically
• The message "Not supported" is displayed
• "No Signal" is displayed
• Images are fuzzy, out of focus, or distorted
• Interference or distortion appear in images
• The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed
Only part of the image is displayed, the height and width ratios
of the image are not correct, or the image may appear reversed
from top to bottom or left to right.
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
• Images appear dark
Problems when Projection Starts
• The projector does not turn on
Problems with Content Playback Mode
• Cannot play the playlist
Other Problems
• There are afterimages (screen burn-in) in the projected image
• No sound can be heard or the sound is faint
• The remote control does not work
sp.191
• Nothing appears on the external monitor
• I want to change the language for messages and menus
sp.191
• Email is not received even if a problem occurs in the projector
• "The battery that saves your clock settings is running low." is
sp.192
displayed
sp.192
sp.192
sp.193
sp.193
sp.194
sp.195
sp.195
sp.196
sp.197
190
sp.197
sp.198
sp.198
sp.199
sp.199
sp.200
sp.200