Wired Network Projection; Selecting Wired Network Settings - Epson EB-L1075U User Manual

Table of Contents

Advertisement

Wired Network Projection

You can send images to your projector through a wired network. To do
this, connect the projector to your network, and then set up your projector
and computer for network projection.
After connecting and setting up the projector, install Epson iProjection
from the EPSON Projector Software CD-ROM (if available) or Web site.
Epson iProjection software sets up your computer for network projection. It
also allows you to hold interactive meetings by projecting user's computer
screens over a network. See the "Epson iProjection Operation Guide
(Windows/Mac)" for instructions.

Selecting Wired Network Settings

Before you can project from computers on your network, you need to select
network settings on the projector.
a
Make sure you already connected the projector to your wired network
using the LAN port.
s "Connecting a LAN Cable"
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
p.52
d
Select the Basic menu and press [Enter].
e
Select the basic options as necessary.
• Projector Name: Enter the projector name used to identify the
projector over a network. You can enter up to 16 single-byte
alphanumeric characters.
• PJLink Password: Lets you set a password for using the PJLink
protocol for projector control. You can enter up to 32 single-byte
alphanumeric characters.
• Remote Password: Allows you to set an authentication password
for using the Remote function in Epson Web Control when setting
or controlling the projector. You can enter up to 8 single-byte
alphanumeric characters. (The user name is EPSONREMOTE; the
default password is guest.)
• Web Control Password: Allows you to set an authentication
password for using Web Control in Epson Web Control when
setting or controlling the projector. You can enter up to 8 single-
byte alphanumeric characters. (The user name is EPSONWEB; the
default password is admin.)
121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents