Screen Settings; Adjusting The Position Of The Image On The Projected Screen - Epson EB-L1075U User Manual

Installing the Projector
a
• You can change the setting as follows by pressing down the [A/V
Mute] button on the remote control for about five seconds.
Front W Front/Ceiling
Rear W Rear/Ceiling
• To rotate the menu display, set OSD Rotation in the Configuration
menu.
s Extended - Display - OSD Rotation

Screen Settings

Set the Screen Type according to the aspect ratio of the screen being used.
The area where the image is displayed matches the shape of the screen.
a
The settings for the Screen Type at the time of purchase are as
follows:
• WUXGA/WXGA projector: 16:10
• XGA projector: 4:3
a
Press the [Menu] button while projecting.
"Configuration Menu Operations"
s
b
Select Display from Extended.
c
Select Screen Type from Screen.
d
Select the screen's aspect ratio.
The shape of the background test pattern changes depending on the
setting.
p.146
p.136
e
Press the [Menu] button to finish making settings.
a
• When you change the Screen Type, adjust the aspect ratio for the
projected image as well.
s "Changing the Aspect Ratio of the Projected Image"
• The Message Broadcasting function for Epson Projector Management
does not support this function.

Adjusting the position of the image on the projected screen

You can adjust the position of the image if there are margins between the
edge of the image and the projected screen frame due to the Screen Type
setting.
Example: When the Screen Type is set to 4:3 for the WUXGA/WXGA
projector
32
p.80