Epson EB-L1075U User Manual page 128

Wireless Network Projection
e
Select the Wireless LAN menu and press [Enter].
f
Select the Security setting and press [Enter].
g
Select the security settings to match your network settings.
• WPA2-PSK, WPA/WPA2-PSK:
Select Setup complete. Follow the on-screen instructions to save
the settings and close the menu.
• WPA2-EAP, WPA/WPA2-EAP:
Select EAP Method and press [Enter].
h
Select the protocol for authentication as the EAP Type setting.
i
To import your certificate, select the certificate type and
press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for the PEAP, PEAP-TLS, EAP-TLS, or EAP-FAST
type
a
You can also register the digital certificates from your Web
browser. However, be sure to register just once or the certificate
may not install correctly.
s "Setting a certificate using a Web browser"
j
Select Register and press [Enter].
k
Connect a USB storage device to the projector's USB-A port (the
wireless LAN module installation section).
If the wireless LAN module is already installed in the projector,
remove it.
"Installing the Wireless LAN Unit"
s
l
Press [Enter] to display the certificate list.
m
Select the certificate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certificate.
128
p.133
p.54