Adjusting the Projected Images
Noise Reduction
You can smooth out rough images for softer image quality when inputting
progressive signals or progressive interlace signals.
a
This is disabled in the following cases.
• When 4K Enhancement is enabled
• When a signal with a resolution that exceeds WUXGA is input
a
Select Noise Reduction from Image Enhancement, and then
press the [
] button.
b
Use the [ ][ ] buttons to adjust the value.
c
Press the [Esc] button to return to the previous screen.
MPEG Noise Reduction
You can reduce dot and block noise that occurs in outlines when projecting
MPEG movies.
a
This is disabled in the following cases.
• When 4K Enhancement is enabled
• When a signal with a resolution that exceeds WUXGA is input
a
Select MPEG Noise Reduction from Image Enhancement, and
then press the [
] button.
b
Select a level to reduce noise from Low, Normal, or High, and
then press the [
] button.
If Off is selected, MPEG Noise Reduction is disabled.
c
Press the [Esc] button to return to the previous screen.
86