Connector Ports - Epson EB-L1075U User Manual

Part Names and Functions

Connector Ports

Name
A
For analog RGB signals from a computer and component
BNC port
video signals from other video sources.
B
For analog RGB signals from a computer and component
Computer Port
video signals from other video sources.
C
Inputs audio from equipment connected to the HDMI
Audio3 port
port or the DVI-D port.
D
Inputs audio from equipment connected to the Computer
Audio1 port
port.
E
Monitor Out port Outputs to an external monitor the analog signal from the
computer connected to the Computer port or the BNC
port. You cannot output signals input from other ports or
component video signals.
F
Outputs audio from the currently projected image to an
Audio Out port
external speaker.
G
Audio2 port Inputs audio from equipment connected to the BNC port.
Function
Name
H
Cable holder Run a commercially available cable tie to secure cables.
I
When controlling the projector from a computer, connect
RS-232C port
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
J
Connects the optional remote control cable set and inputs
Remote port
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories and Consumables"
K
Service port This is used for batch settings. This port is for control use
and should not normally be used.
s "Batch Setup"
L
Inputs video signals from HDMI compatible video
HDMI port
equipment and computers.
M
DVI-D port Inputs the computer DVI-D signals.
N
Connects a LAN cable to the optional HDBaseT
HDBaseT port
Transmitter.
s "Connecting an HDBaseT Transmitter"
s "Optional Accessories and Consumables"
O
LAN port Connects a LAN cable to connect to a network.
17
Function
p.226
p.233
p.164
p.53
p.233