Problems With Content Playback Mode; Cannot Play The Playlist; Other Problems; There Are Afterimages (Screen Burn-In) In The Projected Image - Epson EB-L1075U User Manual

Problem Solving

Problems with Content Playback Mode

Cannot play the playlist

Check
Is Content Playback set to On?
Are there any playlists on the USB flash drive?
Is the USB flash drive connected to the projector?
Is the USB flash drive partitioned?
Are you playing the same playlist on projectors with different
resolutions?

Other Problems

There are afterimages (screen burn-in) in the projected image

Check
Are you using Refresh Mode?
Set Content Playback to On, and then restart the projector. You can only play playlists on USB flash drives in Content
Playback mode.
s Settings - Content Playback - Content Playback
Make sure the USB flash drive contains a playlist. See the "Epson Projector Content Manager Operation Guide" for
details on creating playlists.
Make sure the USB flash drive is connected directly to the projector. Do not use a multicard reader or a USB hub.
If the USB flash drive is partitioned, you may not be able to play back playlists. Delete all of the partitions before saving the
playlists on the USB flash drive.
Do not share a playlist between projectors that are different in resolution. Color and shape effects added by using
Overlay Effect may not be reproduced correctly.
s Settings - Content Playback - Overlay Effect
You can remove afterimages (screen burn-in) from the projected image by using Refresh Mode. Select Start
from Refresh Mode in the Reset menu.
s Reset - Refresh Mode p.162
Remedy
p.143
p.143
Remedy
197