Correcting The Focus; Correcting Distortion (Image Warping) - Epson EB-L1075U User Manual

Installing the Projector

Correcting the Focus

a
Press the [Focus] button on the remote control or the [Lens]
button on the control panel.
Repeatedly press the [Lens] button on the control panel until the
focus adjustment screen is displayed.
Using the remote control
b
Press the [ ][ ] buttons to adjust.
Using the remote control
The displayed screen may differ depending on your lens.
Using the control panel
Using the control panel
a
When using the following lens, a message prompting you to
adjust the distortion (image warping) is displayed. After
adjusting the focus, adjust the distortion.
ELPLX01, ELPLX01W, ELPLU03, ELPLU04, ELPLW05,
ELPLW08, ELPLU02
s "Correcting Distortion (Image Warping)"
c
Press the [Esc] button to finish the adjustment.

Correcting Distortion (Image Warping)

When using a short throw zoom lens and focusing at the center of the
screen, the surrounding image may warp and be out of focus. Follow the
steps below to correct the warping.
a
Press the [Focus] button on the remote control or the [Lens]
button on the control panel.
Repeatedly press the [Lens] button on the control panel until the
focus adjustment screen is displayed.
b
Press the [ ][ ] buttons to focus the image around the center of
the lens.
38
p.38