Adjusting The Height Of The Projected Image (For Normal Installment) - Epson EB-L1075U User Manual

Installing the Projector
Function
Reset Memory
a
If the mark on the left of the memory name is turned blue, it
means the memory has already been registered. When you
select a registered memory, a message is displayed asking you to
confirm that you want to overwrite the memory. If you select
Yes, the previous settings are deleted and the current settings
are registered.
Explanation
Resets the name and settings of a saved memory.
Adjusting the Height of the Projected Image (for
Normal Installment)
Extend or retract the front feet to make adjustments. You can adjust the
position of the image by tilting the projector up to 10 degrees.
A
Extend the front feet.
B
Retract the front feet.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
41