Problem Solving - Epson EB-L25000unl User Manual

Problem Solving

If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems Relating to Images
• No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
• Moving images are not displayed
Videos played back on a computer are black or no image is
projected, or the video is not played back on the computer.
• Projection stops automatically
• The message "Not supported" is displayed
• The message "No Signal" is displayed
• Images are fuzzy, out of focus, or distorted
• Interference or distortion appear in images
• The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed
Only part of the image is displayed, the height and width ratios
of the image are not correct, or the image may appear reversed
from top to bottom or left to right.
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
• Images appear dark
• Automatic adjustments are not performed correctly
Problems when Projection Starts
• The projector does not turn on
Other Problems
• The remote control does not work
• Cannot control correctly using Art-Net
• Nothing appears on the external monitor
• I want to change the language for messages and menus
• Email is not received even if a problem occurs in the projector
sp.164
• "The battery that saves your clock settings is running low." is
displayed
sp.164
sp.165
sp.165
sp.165
sp.166
sp.166
sp.167
sp.167
sp.168
sp.169
sp.169
sp.170
163
sp.171
sp.171
sp.172
sp.172
sp.172