Adding Effects To Images (Effect Feature) - Epson EB-L1075U User Manual

Content Playback Feature
a
• You need to assign USB to a User Button in advance.
s Settings - User Button
• The USB flash drive must meet the following requirements.
- Formatted as FAT 16/32
- Only one partition
- No security features enabled
- Do not use a multi-card reader or USB hub
- Total length of USB flash drive is 6 cm or less
a
Create a playlist using Epson Projector Content Manager and save
it to a USB flash device.
a
See the "Epson Projector Content Manager Operation Guide"
for details.
b
Connect the USB flash drive to the projector's USB-A port (the
wireless LAN module installation section) while Content Playback
mode is enabled.
"Installing the Wireless LAN Unit"
s
p.143
p.54
c
Press the user button assigned to USB on the remote control.
The first playlist or the scheduled playlist is played.
a
• Press the numeric buttons while holding down the [Num]
button to play a playlist that has been registered to your
favorites. You can register favorites using Epson Projector
Content Manager.
• To select a playlist to play from the list, select USB Viewer
from the Settings menu, and then use the up, down, left, and
right buttons to select your file.
s Settings - Content Playback - USB Viewer

Adding Effects to Images (Effect Feature)

In Content Playback mode, you can change the color and shape of the
image you are projecting.
107
p.143