Edge Blending - Epson EB-L1075U User Manual

Multi-Projection Function
a
Before performing tiling, adjust the projected image so that it is a
rectangle. Also, adjust the size and focus of the images.
s "Adjusting the Image Size"
s "Correcting the Focus"
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended, and then press the [
button.
c
Select Tiling, and then press the [
d
Select Layout, and then press the [
(1) Set the number of projectors in Row and Column.
(2)
Select Settings, and then press the [
e
Repeat steps 1 to 4 for each projector to be used for tiling.
p.37
p.38
] button.
] button.
] button.
f
Select Location Setup, and then press the [
(1) Set the positions of the projected images in Row Order and Column
Order.
Row Order: Place screens from top to bottom in the order of 1, 2, 3.
Column Order: Place screens from left to right in the order of A, B, C.
(2)
Select Settings, and then press the [
g
Repeat step 6 for each projector.
h
Input the image signal to display the image.
]
"Automatically Detecting Input Signals and Changing the
s
Projected Image (Source Search)"
When tiling is complete, adjust any positional gaps and the tint of the
projected images.
"Adjusting the projected images"
s

Edge Blending

You can fine tune the overlapping areas to make seamless screen.
] button.
] button.
p.61
p.90
91