Setting The Amount Of Light Of The Projected Image - Epson EB-L1075U User Manual

Adjusting the Projected Images
A B
50% 41,000 hours
40% 56,000 hours
30% 78,000 hours
a
• This is an approximate guide only and may change depending on
the projector's usage and surroundings.
• The times above are the standard hours when using the projector
continuously without changing the Brightness Level or Constant
Brightness settings and are not guaranteed.
• This is an approximate guide only and may change depending on
the projector's usage and surroundings. You may need to replace
internal parts sooner than the estimated light source operation time.
• When Constant Brightness is set to On, and the approximate
constant time has been exceeded, you may not be able to set a high
value for Brightness Level.
Illustration
Setting the Amount of Light of the Projected
Image
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images. You can also set
the light source to turn off automatically.
a
Press the [Menu] button while projecting.
b
Select Light Source Control from Image, and then press the [
button.
c
Select Light Source Control, and then press the [
d
Select the light source operation according to the image signal,
and then press the [
] button.
] button.
79
]