Connecting Image Sources - Epson EB-L1075U User Manual

Connecting Equipment

Connecting Image Sources

To project video images, connect to the projector using one of the following methods.
A
When using a commercially available component video cable (D-sub/component converter)
Connect the component output port on the image source to the projector's Computer port.
You can output audio from the Audio Out port on the projector by connecting the audio output port on the video equipment to the projector's Audio1 port using a commercially
available audio cable.
B
When using a commercially available component video cable (RCA) and a BNC/RCA adapter
Connect the component output port on the video equipment to the projector's BNC port (R/Cr/Pr, G/Y, B/Cb/Pb).
You can output audio from the Audio Out port on the projector by connecting the audio output port on the video equipment to the projector's Audio2 port using a commercially
available audio cable.
C
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port.
You can send the image source's audio with the projected image.
Computer
Audio1
BNC(R/Cr/Pr, G/Y, B/Cb/Pb)
Audio2
HDMI
Y
Cb/Pb
Cr/Pr
AUDIO OUT
Y
Cb/Pb
Cr/Pr
AUDIO OUT
HDMI OUT
49