Basic Control Screen - Epson EB-L1075U User Manual

Monitoring and Controlling
a
Connect your device to the same network as the connected
projector.
The connection method varies depending on the device. See the
manual supplied with your device for details. When using a mobile
device, check the Wi-Fi settings.
b
Start the Web browser on your device.
c
Connect by entering the address of the connected projector in the
URL field of the Web browser.
The Home screen is displayed.
A
Basic Control
s "Basic Control Screen"
B
Lens Control
s "Lens Control Screen"
C
Status Information
s "Status Information Screen"
D
Advanced
You are moved to the Advanced screen.
E
Crestron Connected
s "About Crestron Connected
p.216
p.218
p.220
®
" p.228
F
Test Pattern
s "Test Pattern Operation Screen"
G
OSD Control Pad
s "OSD Control Pad Screen"
a
• When performing the functions from the Home screen, you
may be prompted to enter the user name and password.
When the login screen is displayed, enter your user name and
password. (The user name is EPSONWEB; the default
password is admin.)
• You cannot change the user name. You can change the
password in the Network menu from the Configuration menu.
s Network - Basic - Web Control Password
• You must enter the user name for Web Control Password
even when the password is disabled.
• You can only set the following items from the Advanced
screen.
Monitor Password (up to 16 single-byte alphanumeric
characters)
s Network - Basic - Monitor Password
IPv6 Settings (Manual)
s Network - IPv6 Settings p.154,
Add HTTP port (for the port number used for Web control,
use anything except for 80 (default), 843, 3620, 3621, 3625,
3629, 4352, 4649, 5357, 10000, 10001, 41794)
s Network - Others

Basic Control Screen

You can perform basic projector operations.
When the login screen is displayed, enter your user name and password.
(The user name is EPSONREMOTE; the default password is guest.)
216
p.219
p.217
p.153
p.153
p.157
p.159