Connector Removal; Figure 16: Pulling The Pull Tab; Figure 17: Removing The Connector Without Tools; Figure 18: Removing The Connector Using A Screwdriver - WAGO I/O-SYSTEM 750 Manual
2ai 4-20ma diff. 2-channel analog input module 4-20 ma differential inputs
Hide thumbs
Also See for I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
32
Mounting
5.3.2
Connector Removal
1.
Remove the connector from the I/O module by pulling the orange pull tab
on the connector toward the top of the module.
Figure 16: Pulling the Pull Tab
The connector detaches from the module.
Figure 17: Removing the Connector Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position shown
(in the figure below) to remove the connector.
Figure 18: Removing the Connector Using a Screwdriver
WAGO I/O-SYSTEM 750
753-454 2AI 4-20mA Diff.
Manual
Version 1.1.0
Advertisement
Chapters
Table of Contents
