28
Mounting
5.2.2
Removing the I/O Module
Remove pluggable connector!
Before removing a 753 Series I/O Module from the node, you must first remove
the pluggable connector from the module (see section "Connector Removal")!
1.
Remove the I/O module from the node by pulling the release tab.
Figure 8: Removing the I/O Module (Example)
Electrical connections for data or power contacts are disconnected when removing
the I/O module.
WAGO I/O-SYSTEM 750
753-454 2AI 4-20mA Diff.
Manual
Version 1.1.0