Lcd Panel - Digi LTS 32 User Manual

Standard MIBs supported
The standard MIBs supported in ConnectPort LTS products are:

MIB-II (RFC 1213) This is a MIB for managing a TCP/IP network. It is an update of the
original MIB, now called MIB-I. MIB-II contains variable definitions that describe the most
basic information needed to manage a TCP/IP network. These variable definitions are
organized into several groups, such as groups for managing the system, network interfaces,
address translation, transmission media, and various protocols, including IP, ICMP, TCP, UDP,
EGP, and SNMP.

CHARACTER-MIB (RFC 1658)

RS-232-MIB (RFC 1659).
Digi enterprise MIBs supported
In addition to the standard MIBs, ConnectPort LTS products use several Digi enterprise MIBs,
including:

DIGI-CONNECTPORT-LTS.mib: for reading/writing configuration and handling device
information. This MIB gives access to elements like port configurations, firmware revision,
device name, IP network configuration, memory, and CPU statistics.

DIGI-SERIAL-ALARM-TRAPS.mib: for handling alarms sent as SNMP traps.
Additional SNMP resources
A variety of resources about SNMP are available, including reference books, overviews, and other
files on the Internet. For an overview of the SNMP interface and the components of MIB-II, go to
http://www.rfc-editor.org/rfcsearch.html, and search for MIB-II. From the results, locate the text
file describing the SNMP interface, titled Management Information Base for Network Management
of TCP/IP-based internets: MIB-II. The text of the Digi enterprise MIBs can also be displayed.
For additional discussion of using SNMP as a device monitoring interface, see "Monitoring
Capabilities from SNMP.‖

LCD panel

The LCD panel can be used to set several configuration settings, including IP address, hostname,
and Domain Name Server (DNS) settings. For more information, see LCD interface: configuration,
monitoring, and diagnostics' on page 131.
36