Build Plate Leveling - FLASHFORGE 3D PRINTER Hunter User Manual

4.4 Build Plate Leveling

4.4.1 Loosen the screw which is located on the right and above the
build plate with a 4mm hexagon wrench. Showed in the picture
below:
1
4.4.2 Manually tighten the platform screw which is located in the
middle and above the build plate，manually tighten the two vat film
screws which is located on the right/left of resin vat. Showed in the
picture below:
Hunter User Guide | www.flashforge.com 0086-0579-82273989
31