FLASHFORGE 3D PRINTER Hunter User Manual page 37

Move model around on XY-axis; shift+click to move along Z axis
Turn and rotate your model
Scaling the size of your object
Cut the model into several parts
Print it directly with your Hunter or export to your USB stick.
5.2.3 Loading
You can load a model file or Gcode file into your FlashDLPrint by the following six
methods:
Method 1: Click the
Method 2: Select the file for loading and drag the file to the main interface of the
software.
Method 3: Click [File]--[Load
Method 4: Click [File]--[Examples]
Method 5: Click [File]--[Recent Files]
Method 6: Select and drag the target file to the icon of FlashDLPrint.
Note: .STL, .SLC,.OBJ, .3MF ,.FDP and
supported by FlashDLPrint for editing.
5.2.4 Views
①
Changing views
Change model views by moving, rotating, scaling.
Hunter User Guide | www.flashforge.com
Load icon on the main interface. Then select the object file.
File]. Then select the object file for loading.
to load the example files
to load the files opened recently.
.FPP, ways to store 3D models, are
37
0086-0579-82273989