Methods Of Printing - FLASHFORGE 3D PRINTER Hunter User Manual

shown below.
6-5

6.2 Methods of printing

Printing from USB
1. Connect Hunter to the computer with the USB cable.
2. Turn on the Hunter.
3. Select [Print] from menu bar, then select [Connect].
4. Click on [Rescan], then [Connect].
5. Now the printer is connected with FlashDLPrint.
6. Click [Print] icon, and a printing options screen will appear.
7. Save the file at any location, and the object will start slicing.
8. After slicing the object, it will automatically upload the gcode to the Hunter.
Printing from USB stick
1. Click [Print], and a printing options screen will show up.
3. Click [OK], and save the gcode file in the USB stick.
4. FlashDLPrint will begin slicing the 3D model.
5. After slicing the object, take the USB stick from the computer. Insert it into the
USB stick slot on the Hunter.
Hunter User Guide | www.flashforge.com 0086-0579-82273989
55