FLASHFORGE 3D PRINTER Hunter User Manual page 13

Accessories Manual
 Power Cable
Used to power on the printer, detailed instruction in unpacking chapter and hardware
assembly chapter of user manual.
 USB Cable
Used to connect computer to printer, then print files can be transferred and printed out,
detailed instruction in unpacking or 5.2.13 print menus or 6.2 print methods of the user
manual.
 Quick Start Guide
Used for first print instruction, help you finish your successful first print quickly.
 After-sales service card
Used when maintenance, please keep it well and provide it to flashforge support team
when maintenance.
 Power Adapter
Used to power on the printer, detailed instruction in unpacking chapter and hardware
assembly chapter of user manual.
 Vat film
Installed inside the resin vat. Vat film quality is important for printing effect, and vat
film is replaceable. Detailed instruction in page 18 of the Quick Start Guide(How to
change the vat film).
 Gloves
Used when doing cleaning or other processing. Detailed instruction in the Quick Start
Guide.
 Brush
Used when doing already-printed model's cleaning or other after processing. Detailed
instruction in the Quick Start Guide.
 Metal Scraper
Used when doing already-printed model's removing from the build plate. Detailed
instruction in page 15 of the Quick Start Guide(Clean and remove the model).
! Metal Scraper is very sharp.
 Rinse Bucket
Used to clean or remove model after model is printed out correctly, detailed instruction
in unpacking or 6.3 Model Processing chapter of the user manual, or in page 15 of the
Quick Start Guide.
 Plastic Scraper
Used when doing already-printed model's removing from the build plate. Detailed
instruction in page 15 of the Quick Start Guide(Clean and remove the model).
 Soft Cloth
Used when doing the cleaning.
 Photopolymer Resin
Used for printing, detailed instruction in unpacking and hardware assembly chapter of
the user manual.
 Filter screen
Hunter User Guide | www.flashforge.com 0086-0579-82273989
13