FLASHFORGE 3D PRINTER Hunter User Manual page 40

Method 2: Click the
values in X/Y/Z axes positioning. Click
5.2.7
Scale
Select the target object and scale the object by the following two methods:
Method 1: Click the
scale the model. The corresponding values will display near the object.
Method 2: Click the
axes positioning. Click the
Click [Reset] to reset the size of model.
Note: If the [Uniform Scaling]
proportion when changing
only change the value of the corresponding positioning.
5.2.8
Cut
Left-click on the model to select it and double-click on the
plane. The direction and position are available for setting.
①Draw with Mouse
②X Plane
Hunter User Guide | www.flashforge.com
[Rotate] icon on the left, and then enter into rotating angel
[Reset]
[Scale] icon on the left, hold down the left mouse button and
[Scale] icon on the left and then enter into scale values in X/Y/Z
[Maximum] button to get largest size possible for building.
radio button is clicked, it will scale the model in equal
value in any positioning of the model. Otherwise it will
to reset rotating angel values.
[Cut]
5-4
40
icon to set the cut
0086-0579-82273989