Download
Share
Print this page
FLASHFORGE 3D PRINTER inventor Quick Start Manual
  1. Manuals
  2. Brands
  3. FLASHFORGE 3D PRINTER Manuals
  4. 3D Printers
  5. inventor
  6. Quick start manual

FLASHFORGE 3D PRINTER inventor Quick Start Manual

Hide thumbs Also See for inventor:

Advertisement

Quick Links

Download this manual See also: Quick Start Manual
Inventor
Quick Start Guide
SZ14-EN-001
1. Do not peel the yellow film from the build plate. It is heat-resistant tape, which makes objects stick to the build plate easily.
2. Do not remove the wrapping around the nozzle. It consists of ceramic fiber and heat-resistant tape that help to keep the nozzle
Caution
at a constant temperature so as to extrude the filament fluently.
3. If print with PLA filament, please remove the lid and open the front door to ventilate for a better printing performance.
1. High Temperature! Platform may have been heated before; make sure it has cooled down before inner operation.
Warning
2. Loose clothes, jewelry and long hair can be caught in moving parts. Please keep away from them.
This guide only applies to Inventor 3D printer of Flashforge

Advertisement

loading

Related Manuals for FLASHFORGE 3D PRINTER inventor

Summary of Contents for FLASHFORGE 3D PRINTER inventor

  • Page 1 1. High Temperature! Platform may have been heated before; make sure it has cooled down before inner operation. Warning 2. Loose clothes, jewelry and long hair can be caught in moving parts. Please keep away from them. This guide only applies to Inventor 3D printer of Flashforge...

  • Page 2: Kit Contents

    1.Extruder hot during operation. CAUTION 使用过程中喷头会发热。 请勿触摸 2.Heating plate hot during operation. Allow surface to cool before servicing. Do Not Touch 使用过程中加热平台会发热，待平台表面冷却后再操作。 Inventor 3D Printer Quick Start Guide After-sales Service Card Build Tape x2 Leveling Tool Filament Spool*2 Spool Lock*2...
  • Page 3 Getting to Know Your Inventor Camera Extruder 1.Extruder wire harness 10.Touch Screen 11.Camera 2.Guide wire(Around each one) 18 19 20 12.Cooling Fan 3.Y-Axis Guide Rod 13.Spring Presser 4.X-Axis Guide Rod 5.Build Plate 14.Turbofan 19.USB Input 6.Build Platform 15.Turbofan Baffle 7.Bracket 16.Nozzle...
  • Page 4 1.Open the carton and take the lid out. There are 2.Take the two foam sheets out from the top. 3.Firmly grasp the two sides handles of Inventor. <Quick start guide> / <After-sales Service Lift it out from the carton and place it on a stable surface.
  • Page 5 7.Remove the foam from the back of the logo 8.Place the dual extruder on the extruder seat, 9.Remove the foam from the back of the logo as shown. board. board. 10.Elevate the build plate to its limit. 11.Take two rolls of filament and two pieces 12.Depress the build plate to its bottom.

  • Page 6: Hardware Assembly

    Hardware Assembly Bolt Hole Bolt Hole Bolt Hole Bolt Hole Extruder Assembly (1) Place the dual extruder on the extruder seat. (As shown in the left picture) (2) Take the M2.5 Allen Wrench from the tool bag and two M3*8 bolts(longer ones) from the extruder’s accessory kit. (3) Adjust the extruder location to align the bolt holes.
  • Page 7 Turbofan Baffle Assembly Turbofan Baffle Assembly Complete Turbofan Baffle (1) Use the M2.5 Allen Wrench to remove two turbofan bolts. (As shown in the picture above) (2) Take the turbofan baffle from the extruder’s accessory kit. (3) Install the turbofan baffle to the turbofan. (As shown in the top-right picture) Caution: During installation, please take care of the turbofan cable.
  • Page 8 Turbofan Seat (1) Place the turbofan sub-assembly besides the turbofan seat. (2) Insert the bump on the turbofan seat to the turbofan sub-assembly. (3) Screw the two bolts in. (4) Take a M3*6 bolt from the extruder’s assembly kit and complete installation according to the instruction below. Align the bump on the turbofan seat to the hole in turbofan...

  • Page 9: Leveling Build Plate

    Leveling Build Plate 简体中文 HOME Language TP Adjust FactoryReset English Filament Level Home Manual 繁體中文 Update Fan On WIFI 日本語 Français Print Preheat Tools Enable Camera filament Deutsch Setting Status About detector (1)Attach the power supply, plug in the power cord into an electrical outlet and turn on the printer. (2)According to the above steps, you can change the operation language.
  • Page 10 How to level the build plate (1) Tighten the three leveling knobs under the build platform until you cannot tighten them any more. (2) Select the PlateLeveling.x3g on the control panel, and press [OK] to start leveling. Then press [OK] for page-turning to read the leveling instructions. (3) The build plate and the nozzle start moving, once they suspend, you need to adjust the corresponding knob under the right nozzle.
  • Page 11 Place filament and loading filament Correct Direction Wrong Direction (1)Unpacking filament. (2)Place filament on spool lock on both sides. Guide Wire TIPS Make sure correction direction when filament place on spool lock. As shown on the right picture. (1)Shown as below, put spool lock into center hole of filament and then rotate 90 degree to make sure its locked.
  • Page 12 (4) After filament placement, filament through guide wire. (5) Secure the filament with a flat cross-section and load it by inserting the filament into the extruder as an upright angle, meanwhile press down the spring presser. Loading Filament (1)Tap the right icon labeled [Tools], then tap [Filament]. (2)Select [Load Left] or [Load Right] as you want.

  • Page 13: First Print

    1. Load the filament for a while to extrude the melted filament out of the extruder that you printed last time. 2. Do not leave the Inventor unattended during operation. 3. If needed, gently use the scraper to remove the object from build plate to avoid damaging the objects and build plate. If desired, heat the build plate to 40~50℃to separate the object from the build plate.