Table of Contents
Advertisement
Chapter 5: Build Plate Leveling
Guider IIS series creatively adopts three-point intelligent leveling system,
which will give clear and comprehensive feedback to users. There are three
spring-loaded knobs under the build platform. The distance between the plate
and nozzle increases while tightening the knobs. On the contrary, the distance
reduces.
5-1
(5-1) Tap [Tools] - [Level] on your Guider IIS series touch screen. Please wait
while the extruder and platform finish initial movements. After that, operate
according to the guide on the touch screen.
5-2
(5-2) After tapping [Yes], the extruder starts to move towards the first point
and the plate moves up and down to verify the distance between nozzle and
plate.
Guider IIS series User Guide | www.flashforge.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Guider IIS Series and is the answer not in the manual?
Questions and answers
What is the default IP address
The default IP address for the FLASHFORGE Guider IIS Series 3D printer is not provided in the given context.
This answer is automatically generated