Leveling Build Plate - FLASHFORGE 3D PRINTER inventor Quick Start Manual

Leveling Build Plate

Print Preheat Tools
(1)Attach the power supply, plug in the power cord into an electrical outlet and turn on the printer.
(2)According to the above steps, you can change the operation language.
Turn the knob clockwise
Raise the build plate to reduce the distance
between the nozzle and build plate.
HOME
Filament Level Home Manual
Setting Status About
Adjust the leveling knobs to level the build plate
Language TP Adjust FactoryReset
Update
Fan On WIFI
Enable
Camera filament
detector
Turn the knob anticlockwise
Lower the build plate to increase the distance
between the nozzle and build plate.
简体中文
English
繁體中文
日本語
Français
Deutsch