Table of Contents
Advertisement
Tap [supports options], supports options box popups, supports type is columnar
only, selection profiles are general, partial frame, dental crown and bridge, you can
also customize supports parameters and save as fixed profile.
A. General setting:
Overhang threshold: the default value is 45°, the highest value is 60°,the
lowest value is 30°.
Post space: this highest is 10.0mm. The lowest is 1.0mm
Tip diameter: columnar tip diameter, the highest can be set to 1mm, the lowest is
0.25mm.
Raise height: when adding supports, raise model up to certain distance, the
lowest height is 0. The highest is 100mm.
Cross connection: cross connection between supports to increase supports
intensity.
Y-shaped connection: Y-shaped connection between supports to increase
supports intensity，thus reducing inner support and save resin.
Hunter User Guide | www.flashforge.com
5-7
42
0086-0579-82273989
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Hunter and is the answer not in the manual?
Questions and answers