Identify Analog Clock Model - Primex XR Series Install Manual

Identify Analog Clock Model

Primex has two types of battery-operated analog clocks, an Automatic Setting Analog Clock (current generation) and Manual
Setting Analog Clock (first generation). Both clocks receive their signal from the Primex Transmitter in the same way, but the set
up and operation of each clock model is different.
The type of model can be determined by viewing the back of the clock.
An automatic setting model only has a button on the back of the clock.
A manual setting model has both a button and a grey set wheel on the back of the clock.
NOTE
Manual set clocks only sync to Channels 1 -16. If there are XR Transmitters on site using a channel higher than Channel
16, Manual Setting Clocks will not be able to receive a signal to sync their time. For further assistance, contact Primex
Technical Support at 1-262-729-4860.
7