Hand Alignment Check - Primex XR Series Install Manual

Hand Alignment Check

If the hand alignment of an Automatic Setting Analog Clock is in question, a hand alignment check can be initiated manually.
How to initiate a hand alignment check
1. Press and hold the button on the back of the clock for 3 seconds until it beeps.
The hands begin to move at an accelerated speed until all three hands align at the 12 o'clock position. The hands stop in this
position to confirm the hands are all properly aligned.
2. The hands remain in this position until the button is again held down for 3 seconds. Press and hold the button for 3 seconds
for a second time; the clock enters the Self Initialization procedure.
Self Initialization
15